This Manual can also be accessed in the Entagged app by clicking the info bubble on the bottom right of your start screen.
■ Top white box: Status bar (from left to right)
■ Big white box: Currently saved barcode
■ Three lines: Menu button
■ Small white box: Paired Entagged
■ Toggle switch: Turn Entagged connection on or off.
■ “PAIR ADDITIONAL ENTAGGEDS”: Search area for pairing new Entaggeds
■ Serial number and connection status
■ Firmware button
■ Accessories button: Pair and unpair additional scanners
■ Unpair Entagged button: Once unpaired, the Entagged will appear in the “Your Entagged” screen as a newly found device.
■ About button
■ Data Privacy button
■ Terms and Conditions button
The Entagged (Hardware)
■ Yellow slow pulse: Not connected, ready to connect
LED off:
– Camera is off
– No battery
– Deep sleep because of longer time of no usage: Turn on camera and tap trigger button on the camera
– Photo is being taken
■ Turquoise slow pulse: App connected but not in active use (app in background, app display off or app not used for 30 seconds)
■ Turquoise continuous on: app connected and in active use (only status where codes can be scanned and will be saved in the EXIF data)
■ Light blue slow pulse: app disconnected but accessory scanner connected (codes can be scanned with scanner but last activity is at least 30 seconds ago).
■ Light blue continuous: App disconnected but accessory scanner connected and in active use.
■ Red: Entagged is in firmware update mode and not connected to app.
■ Dark blue continuous: Firmware update mode and app connected.
■ Dark blue blinking: Firmware update in progress.